=~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2022.08.07 18:24:04 =~=~=~=~=~=~=~=~=~=~=~=
sr
Building configuration...

Current configuration : 4294 bytes
!
version 15.7
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname PE2
!
boot-start-marker
boot-end-marker
!
!
!
no aaa new-model
!
!
!
mmi polling-interval 60
no mmi auto-configure
no mmi pvc
mmi snmp-timeout 180
!
!
!
!
!
no ip icmp rate-limit unreachable
!
!
!
ip vrf Customer_A
 rd 65000:1
 route-target export 65000:1
 route-target import 65000:1
!
ip vrf Customer_B
 rd 65000:2
 route-target export 65000:2
 route-target import 65000:2
!
!
!
!
no ip domain lookup
ip cef
no ipv6 cef
!
multilink bundle-name authenticated
!
!
!
!
!
redundancy
!
no cdp log mismatch duplex
!
ip tcp synwait-time 5
! 
!
!
!
!
!
!
!
!
!
!
!
!
interface Loopback0
 ip address 10.0.0.4 255.255.255.255
!
interface GigabitEthernet0/0
 ip address 10.0.9.10 255.255.255.252
 duplex auto
 speed auto
 media-type rj45
 mpls ip
!
interface GigabitEthernet0/1
 ip vrf forwarding Customer_A
 ip address 10.0.2.1 255.255.255.252
 ip ospf 2 area 0
 duplex auto
 speed auto
 media-type rj45
 mpls ip
!
interface GigabitEthernet0/2
 ip vrf forwarding Customer_B
 ip address 10.0.2.5 255.255.255.252
 ip ospf 3 area 0
 duplex auto
 speed auto
 media-type rj45
 mpls ip
!
interface GigabitEthernet0/3
 no ip address
 shutdown
 duplex auto
 speed auto
 media-type rj45
!
router ospf 2 vrf Customer_A
 router-id 10.0.2.1
 redistribute bgp 65000 subnets
!
router ospf 3 vrf Customer_B
 router-id 10.0.2.5
 redistribute bgp 65000 subnets
!
router ospf 1
 router-id 10.0.0.4
 network 10.0.0.0 0.0.0.255 area 0
 network 10.0.9.0 0.0.0.255 area 0
!
router bgp 65000
 bgp log-neighbor-changes
 neighbor 10.0.0.3 remote-as 65000
 neighbor 10.0.0.3 update-source Loopback0
 !
 address-family vpnv4
  neighbor 10.0.0.3 activate
  neighbor 10.0.0.3 send-community extended
 exit-address-family
 !
 address-family ipv4 vrf Customer_A
  redistribute ospf 2
 exit-address-family
 !
 address-family ipv4 vrf Customer_B
  redistribute ospf 3
 exit-address-family
!
ip forward-protocol nd
!
!
no ip http server
no ip http secure-server
!
ipv6 ioam timestamp
!
!
!
control-plane
!
alias exec sr show run
alias exec sib show ip int brief
alias exec wm write mem
alias exec ct config t
alias exec sir show ip route
banner exec ^C
**************************************************************************
* IOSv is strictly limited to use for evaluation, demonstration and IOS  *
* education. IOSv is provided as-is and is not supported by Cisco's      *
* Technical Advisory Center. Any use or disclosure, in whole or in part, *
* of the IOSv Software or Documentation to any third party for any       *
* purposes is expressly prohibited except as otherwise authorized by     *
* Cisco in writing.                                                      *
**************************************************************************^C
banner incoming ^C
**************************************************************************
* IOSv is strictly limited to use for evaluation, demonstration and IOS  *
* education. IOSv is provided as-is and is not supported by Cisco's      *
* Technical Advisory Center. Any use or disclosure, in whole or in part, *
* of the IOSv Software or Documentation to any third party for any       *
* purposes is expressly prohibited except as otherwise authorized by     *
* Cisco in writing.                                                      *
**************************************************************************^C
banner login ^C
**************************************************************************
* IOSv is strictly limited to use for evaluation, demonstration and IOS  *
* education. IOSv is provided as-is and is not supported by Cisco's      *
* Technical Advisory Center. Any use or disclosure, in whole or in part, *
* of the IOSv Software or Documentation to any third party for any       *
* purposes is expressly prohibited except as otherwise authorized by     *
* Cisco in writing.                                                      *
**************************************************************************^C
!
line con 0
 exec-timeout 0 0
 privilege level 15
 logging synchronous
line aux 0
 exec-timeout 0 0
 privilege level 15
 logging synchronous
line vty 0 4
 login
 transport input none
!
no scheduler allocate
!
end

PE2#